Best Selling Automotive Multimeters Tested And Evaluated in 2023

22000 Counts, AC/DC voltage up to 1000V, AC/DC current up to 20A, resistance, capacitance, frequency, duty-cycle, bandwidth, 46 analog bar, etc. Features with ACV+DCV, hFE, LPF ACV, USB data transmission

UT61+ series is a stable performance, high reliability handheld true RMS digital multimeter, which can be used to measure: AC and DC voltage (up to 1000V), AC and DC current

NCV, Non-contact voltage detection. If the voltage of the wire ≥ 50Vrms (frequency: 50Hz/60Hz), the red indicator light will be on and the buzzer will beep. If no voltage is detected, the LCD will display "EF Safety rating: CAT III 1000V / CAT IV 600V. Good Safe protection

At the same time, this series of instruments has high-frequency response measurement to avoid high-frequency signals that cannot be tested due to insufficient frequency response, which will affect the measurement results. UT61 series is a full-featured inspection instrument that fully meets the needs of electrician maintenance, motor troubleshooting, and electrical engineering maintenance personnel.

After-sales service, if you have any questions before or after purchase, you can contact us, we will reply you within 24 hours and help you solve the problem.

Voltage, resistance, continuity, capacitance

Input terminal for AC and DC current measurements to 10 A and current

Backlit display

Data hold

Diode test, plus frequency and duty cycle measurements

Multimeter measures up to 600V AC/DC voltage, 10A AC/DC current and 40 MOhms resistance

Electrical tester measures temperature, capacitance, frequency, duty-cycle, and test diodes and continuity

CAT III 600V safety rating

Built to withstand a 3.3-foot (1 m) drop and withstand daily wear and tear on the job site

Low battery indicator and easily accessible battery compartment

For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations

Includes test leads, thermocouple with adapter, batteries and user manual

WIDE APPLICATIONS - The AstroAI M4K0R Multimeter accurately measures AC/DC voltage to 600V, Current to 10A, Resistance to 40MΩ. You can use it for continuity test, diode test, battery test and live wire test. Includes 1.5V, 9V and 12V battery test modes to easily test a wide variety of batteries. Multimeter light turns red for low voltage and green for enough voltage.

NON-CONTACT - Fully safe non-contact voltage testing with sound and light alarms. You can detects AC voltage without the use of test leads. Uses NCV function：When the Meter senses a strong AC signal, the red indicator light will turn on and the buzzer will emit a quick beep.

THOUGHTFUL DESIGN - Support Data Hold, Max, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package.

ENSURES SAFETY - Double ceramic fuse is anti-burn and protects from overloading. The multimeter has passed overvoltage category III 600V safety standards. The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks.

ADDITIONAL TIPS - This Multimeter is designed to troubleshoot a variety of automotive and household electrical problems safely and accurately. It’s a suitable tool if you want to do some household or commercial improvements whether DIYers or Hobbyists. Combined with Amazon's excellent delivery, we provide lifetime technical support.

Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance

Voltage tester for batteries, diodes and continuity

Built to withstand a 3.3-foot (1m) drop and withstand daily wear and tear on the job site

For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations

CAT III 600V safety rating

Low battery indicator and easily accessible battery compartment

Includes test leads, batteries and user manual

Basic dc accuracy 0.5%

CAT III 600 V safety rated

Diode and continuity test with buzzer

Small lightweight design for one-handed use

Rugged, durable design

FLUKE BRAND

Versatile Digital Multimeter - Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Temperature

Thoughtful Design - Support Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make the process of measurements easier. Professional level is reflected in some features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage

Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately.

Ensure Safety - Double ceramic fuse is anti-burn and protects from overloading，and it will be more secure and reliable； F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes can protect the multimeter effectively

Additional Tips - Combined with Amazon's superior delivery, we provide lifetime technical support. ( Note: Please take off the cap before using the test leads)

【Versatile Digital Multimeter】Auto-Ranging Volt Meter Voltage Tester measures up to 600V AC/DC voltage, 10A AC/DC current and 60 MOhmsis resistance, and continuity, electrical tester also tests capacitance, frequency, wire on-off, and test diodes and continuity. Perfect for Household Outlets, Fuses, Batteries, Automotive Circuit Troubleshooting etc.

【6000 Counts & Auto Ranging】The 6000 counts provides higher range and more accurate readings to ensure the long-term accuracy of the data. And the automatic range function does not require you to select the knob, it can automatically detect voltage, current, resistance, etc. and automatically switch according to the specific value of the measurement, which makes the measurement process more convenient.

【Non-Contact NCV Detector】This Volt multi meter tester have Non-Contact voltage testing and Live function with sound light alarm. It can detects AC voltage without the use of test leads. When AC voltage is detected, the screen shows "---", the red indicator flashes, and the buzzer beeps.The stronger the AC voltage is detected, the more horizontal lines "----"show on the screen, the faster the indicator flashes and the buzzer beeps.

【Continuity Test with Beep Sound】Compared with the traidtional multimeter, Assark digital voltmeter with beep alarm when testing continuity. It help you know about the volt condition clearly.In adition, the voltage meter Support Low battery prompt, Data retention, Auto power-off function. The backlit LCD makes it more convenient do work in dark environment.

【BUY with Confidence 】Assark all sales provide one-Year Warranty, 30- Days Money back, 24 hours customers service response. If you have any question please feel free to contact us. We will help you solve it at the first time.

VERSATILE DIGITAL MULTIMETER - Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.

TROUBLESHOOTING WITH Accuracy - This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.

ENSURES SAFETY - Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.

EASE OF USE - Support Data Hold, low battery indicator and continuity buzzer. Includes Convenient feature like LCD Backlit Screen makes it easy to use in dimly light areas. Battery / Set of Test Leads / User Manual/ are Included.

ADDITIONAL TIPS - This Multimeter is designed to troubleshoot a variety of automotive and household electrical problems safely and accurately. It’s a suitable tool if you want to do some household or commercial improvements whether DIYers or Hobbyists. (NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing)

UL certified product designed to safely and accurately troubleshoot a variety of automotive and household electrical problems

Auto-ranging scales automatically selects correct measurement range and eliminate the need to dial in the correct range when making electronic measurements

Features large digital display and color coded LED's to easily check the charge status of batteries

Single-setting resistance function for AC and DC voltage

10 MegOhm input impedance; safe for electrical and automotive use; prevents damage to the vehicle’s ECU

▲Classic Automatic Multimeter : 6000 count automatic digital multimeter, can measure the basic functions of AC and DC voltage, AC and DC current, resistance, diode, and continuity test, data retention, backlight, AC and DC switching and other button trigger work

▲NCV Function : Place the top of the meter close to the conductor. If the AC voltage of the conductor is greater than 90V (RMS), the background light of the induced voltage of the meter will flash and be accompanied by the buzzer

▲Continuity Test and Over-Range Display : If the resistance of the tested circuit is less than 100Ω, the buzzer in the meter will sound to remind. When measuring the diode, if the positive and negative poles are reversely connected, it will display “OL”. If the measured current exceeds the range, the dial will display “OL”

▲Auto-Ranging Measures : Automatic range selection, 2/3 readings per second, 6000 effective counts

▲Data Retention : When the measurement reading is unstable, press the HOLD button to fix the reading, and the data hold button is convenient for reading and recording

▲Backlight : Press the backlight button for 2 seconds to turn on the backlight for easy reading in dark places. The backlight will automatically turn off after 15 seconds

▲Overload Protection : There are two fuses on the internal circuit board of the instrument: F250mA/250V, F10A/250V two PTC thermistor protection circuits to prevent circuit damage due to wrong measurement

▲Automatic Sleep Function : When the meter has not been operated for 15 minutes, it will automatically shut down to maintain the power, which is convenient for next use

▲Package Content : 1 x Digital Multimeter, 2 x Test Leads, 2 x AAA Batteries, 1 x Carrying Bag, 1 x User Manual

▲24-Month Warranty : We provide 24 months unconditional warranty and lifetime after-sales service