Best 15 Inch Subwoofer Under $200 Tested And Evaluated in 2023

Four (4) SoundPath Isolation Elastomer Feet with Steel Outer Shell

Four (4) ¼-20 x 20 mm screws

Elastomer Foot with Optimized Durometer

Stainless Steel Machine Screws

Powerful 12" copper-spun front-firing woofer

All-digital amplifier delivers 400 watts of dynamic power

Equally impressive with music and movies; Brushed black polymer veneer cabinet with satin painted plinth

Low pass crossover and phase control

Line/LFE inputs for compatibility with most receivers

10-Inch Dual 2-ohm Car Subwoofer

Peak Power: 1,200 Watts | RMS Power: 600 Watts

2.5" 4-Layer High Temperature Copper Voice Coil

Frequency Response Range: 28 Hz - 300 Hz | Sensitivity: 82.0 dB

High Flux Ferrite Motor | Advanced Air Flow Cooling Design

1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer Built-in Class D amplifier Sealed enclosure with carpet

Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB

Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included

Enclosure Features Carpet finish

Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.

800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.

Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.

Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.

Thermal Protection Circuit, Short Protection Circuit.

Overload Protection Circuit. Phase Switch: 0° or 180°.

Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.

Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.

Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.

Note: Kindly refer User Manual before use

6" x 8" Underseat Subwoofer with 100W Amplifier

Big Bass, Small Space - Infinity BassLink MINI delivers deep bass and takes up minimal space.

Intelligent Electronic Design for Reliable and Extraordinary Performance- The BassLink MINI employs high-pass filters and limiters that deliver exceptional at-the-limits performance

Die-Casting Aluminum Enclosure Design- The all-die-cast aluminum enclosure design not only minimizes size but also eliminates rattles

Bass Volume Remote Control- Bass Volume Remote control is included to let you adjust the sound from the driver’s seat.

Included components: 1x Under seat subwoofer, 14x Screws , 4x Small metal plate, 1x Wiring harness, 1x Bass volume remote control (with cable), 1x 15A Fuse

Hifonics BRUTUS subwoofer with dual 4 Ohm design delivers 3000 watts and features heavy gauge, powder-coated, aluminum die-cast basket.

Vented aluminum former holds a 3" voice coil while allowing the heat to be exchanged. (Less heat means less distortion)

Specialized Hifonics dual poly cotton spider with double centering allows the woofer to handle more power with minimum distortions.

Hifonics heavy duty aluminum die-cast basket allows back venting, which exchanges heat with cool air, resulting in more power handling and increased reliability.

Vented high energy motor assembly with dual 70oz magnets increases power handling and increases SPL.

Sensitivity SPL (1W / 1m) 85 dB, Resonant Frequency 32 Hz

Polypropylene Cone, 2.5 Inch Voice Coil, Rubber Surround

Sealed Enclosure Internal Volume: 1.2 Cubic Feet, Ported Enclosure Internal Volume: 1.8 Cubic Feet

4 Inch Round Inch Port Circumference, 12 Inch Port Length, 34 Hz Port Frequency

4.8 Inch Mounting Height, 11 Inch Mounting Hole Diameter

Dimensions: Depth 13” x Width 13” x Height 5.4”

3 Year Platinum Online Dealer Warranty

CONE: Made from Polypropylene, the CXX124DVC 12-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers. VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights

SURROUND: We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear. STAMPED BASKET: A Die-cast frame can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures

SPECIFICATIONS: Resonant frequency - 32 Hz, Sensitivity SPL (1W/1m) - 85 Db

SPECS: Impedance – 4 Ohms, Port frequency – 34 Hz, Dimensions – 13” x 13” x 5.4”, Mounting Depth 4.8”, Mounting hole 11”, Weight – 7.8 Lbs.

WARRANTY: BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

1200 WATT POWER: This car subwoofer has 1200 Watt peak power that will produce high sound resonance. It also has 70 + 70 oz. heavy double stacked magnet structure, golden input terminals and dual 4 Ohm impedance

WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 15.12"

NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time

KAPTON VOICE COIL: The speaker subwoofer comes with a 2.5” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 90.3dB and a special designed rubber magnet boot

7.68” MOUNTING DEPTH: Easy to install with its 7.68” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual

1600 WATT POWER: This high powered subwoofer system has a maximum power output of 1600 watt / 800watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want

BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for extended excursion

DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound

DUAL VOICE COIL: This complete subwoofer features 60 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has spring loaded push down speaker terminals

12" STANDARD SIZE: Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 5.1" mounting depth and 12.2" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers